Computer Interfaces

 

Dstar & DSP Boards

 

 

 

Filters

 

Keys & Keyers

 

Preamps

 

Remote Head Kits

 

 

Speakers

 

 

TVI Filters

 

Voice Synthesisers



 


 

In Stock


Up to 3 wk delivery

Email us to confirm delivery time



 

TO ORDER JUST DROP US AN EMAIL TO sales@radios.net.au

(WE RESPOND TO EMAILS 7 DAYS PER WEEK)

 

FOR TELEPHONE ORDERS SIMPLY GIVE US A CALL  ON 07 4125 7700

(OVERSEAS CALLERS RING 61-7-41257700)

MON-FRI - 9.30AM EST - 5.30 PM AUSTRALIAN EST

 

WE WILL RESPOND QUICKLY ADVISING OF FREIGHTED PRICE, AVAILABILITY & PAYMENT OPTIONS

 


EXTENSION SPEAKERS

The Yaesu SP-2000 is designed to match the FT2000 series. It features a large 4.7 inch speaker along with a three-selection High-Cut and two-selection Low-Cut Audio Filter system. Selection of the cutoff frequencies may be performed from the front of the speaker:  2.4 kHz/ 1 kHz / 700 Hz for High Cut and 500/300 Hz for Low-Cut. A headphone jack on the front panel is post-filtration. The SP-2000 features dual audio inputs.

 

New Price $299

$18 flat rate shipping to anywhere in Australia


EXTENSION SPEAKERS

YAESU SP8

ICOM SP23



SOLD OUT


Price $289

$18 flat rate shipping to anywhere in Australia

12 month warranty applies to all speaker products

 

Download SP23 Manual


Specifications 

The Yaesu SP-8 is a base speaker with audio filtering. It features both a 1/4 inch headphone jack and a 3.5 mini jack on the front panel. Input A or B or may be selected by a push button switch on the front panel. The panel also has a 4 position MODE switch: Mute, Manual, SSB, CW. There is a 3 position Low Cut Filter knob and 4 position High Cut Filter knob.


The rear panel features Input Jack A and Input Jack B. There is also a Line Out Jack. All three of these jacks are RCA Phono type. The speaker comes with one audio cable (RCA to 3.5mm mini). The SP-8 also has ajustable fron feet. The SP-8 also provides the housing for the Yaesu LL7 phone patch (sold separately).



Specifications

The Icom SP-23 speaker matches many Icom receivers and transceivers. It is 8 ohms and is rated at 2 watts [4 watts maximum]. The SP-23 has four separate audio network filters [HPF1 500 Hz, HPF2 250 Hz, LPF1 3000 Hz, LPF2 1000 Hz]. This allows you to tailor the frequency response.


Metal construction 5.75 x 4.25 x 11.2 inches 3.6 lbs. (145x111x283mm 1.65 kg). The bottom panel of the speaker features a pull-out tilt stand if you wish to angle the speaker. A single audio cable is supplied with a mono mini plug at both ends.


ICOM EXTENSION SPEAKERS

ICOM SP20

ICOM SP21




New Price $259


Price $169

$18 flat rate shipping to anywhere in Australia

12 month warranty applies 

Download SP20 Manual

 


Specifications 

Speaker Size: 5 inches (12 cm)

Rated Input Power: 3 watts

Maximum Rated Power: 5 watts

Rear Panel Input Jacks: Two 3.5mm mini jacks Rear Panel Output Jack: 3.5 mm mini jack Front Panel Jack: 1/4 inch mono headphone jack. Impedance: 8 ohms

Frequency Response: 100 to 9000 Hz

Filter Cut-off Frequencies:

      * HPF1    300 Hz

      * HPF2    600 Hz

      * LPF1  2400 Hz

      * LPF2    800 Hz

Filter Response: -6dB/octave

Enclosure Size: 7.875x5.875x13.375 inches (200x150x344 mm) 6.6 Lbs. (3 kg)



Specifications

The Icom SP-21 speaker matches many Icom receivers and transceivers. It is 8 ohms and handles up to 3 watts. The SP-21 has a snap-out tilt bar to raise the front of the speaker if desired.


Black metal construction 5.25 x 4.25 x 11 inches. A wired-in audio cable, terminating in a 1/8 inch mini plug is featured.

 

SPEAKER SWITCH (SWITCH 2 SPEAKERS BETWEEN 1 RADIO OR VICE VERSA)



 

 

 

 

 

 

 

 

LDG ALK-2

 

The ALK-2 is a switch box for speakers, keying lines, ALC lines or whatever you need. It has two switched and one common set of jacks in the back: 1/8th inch stereo and RCA jacks in parallel. On the front, a push-in/push-out selects the port, and an LED lights to indicate the selection. For instance, you can switch one speaker between two radios, or two radios between one speaker. The ALK-2 runs on 12 volts DC at 100 ma from any suitable source. It makes switching speakers or keys a breeze, letting you use whichever rig you need it when you need it. You can even pre-set it, and remote control it by switching the 12 volt dc on and off from a distance.  .


 

 

Specifications:

  • Two switched sets of parallel-connected 1/8“ stereo jacks and RCA jacks.
  • Two circuits (stereo) switched. Red jacks are right channel, white jacks are left channel.
  • Stereo 1/8“ plug and RCA plugs of a given port are wired in parallel
  • Maximum current 1A per circuit, 32 V.
  • Remote operation possible (see Application Hints)
  • Requires 12 volts at 100 mA, 2.5 x 5.5 mm jack, center positive
  • If RF is transmitted through the ALK-2, keep it below 5 watts, 30 MHz, 3:1 SWR.
  • 6.5“ wide x 3.5“ long x 1.5“ high
  • Weight 1 pound

Super Low Price of only $135

 

EXTENSION SPEAKERS

KENWOOD SP23 EXTENSION SPEAKER



The Kenwood SP-23 base speaker matches several Kenwood transceivers. This versatile 8 ohm speaker features a metal cabinet with flip out tilt bar. Size 4.8 x 3.75 x 9.25 inches 2.8 Lbs. (123x96x235mm 1.3 kg).

 

New Price $185.00

OUT OF STOCK

$15 flat rate shipping to anywhere in Australia


 

 


 


 

radios.net.au (abn 91506699481)

Patrick Star Pty Ltd trading as

A: PO BOX 7664, URANGAN, QLD. 4655

E: sales@radios.net.au

T: 07 4125 7700 (Int'l 61-7-4125 7700)

M: 0410 093 759

F: 03-8640-0419

TRADING HOURS

EMAIL: 24 HOURS - 7 DAYS PER WEEK

TEL: 9.30AM EST - 5.30PM EST MON-FRI

FAX: 24 HOURS - 7 DAYS PER WEEK

 

 

Important Warranty Information (The Lawyers insist we advise you of this)

 

radios.net.au warranty conditions apply and will be provided with your purchase. New equipment is sold with a full 1 year parts and labour warranty. Used equipment  is sold with a full 1 month parts and labour warranty.  

 

Please note that radios.net.au is not affiliated with any radio manufacturing company (Icom, Yaesu, Kenwood etc). As some gear sold here is acquired from offshore (or is "used") it is possible that the local divisions of these companies may not provide servicing support. These companies will certainly not repair under a manufacturers warranty. radios.net.au does however provide full servicing support for product sold here via its network of accredited service technicians

 

 

Privacy Policy

We respect your privacy. Your details will never by given to any other party.

 

© 2008 - radios.net.au