Ham Radios - HF (some with VHF) - ICOM 756 PRO3 HF/6M BASE STATION RADIO WITH COLOURED DISPLAY / BAND SCOPE (THIS IS A USED ITEM- THIS RADIO IS NO LONGER SOLD BRAND NEW - REPLACED BY THE ICOM 7600) - IC-756 PRO3 - radios.net.au shop

AVAILABLE FOR SALE HERE WE HAVE A MINT CONDX ICOM 756 PRO3 WITH ORIGINAL HAND MIC, PWR CABLE AND MANUAL ALL IN ORIG BOX - A 12 MONTH SELLER WARANTY IS APPLICABLE TO THIS PRODUCT. PLEASE NOTE - THIS MODEL HAS NOW BEEN DISCONTINUED BY ICOM AND IS NO LONGER AVAILABLE BRAND NEW -

The Icom IC-756 PROIII is an all mode HF and 6m transceiver. It has a 5" color TFT display, and features a high speed automatic antenna tuner, 32-bit digital signal processor, selectible bandpass filter shape, built-in CW and voice memory keyers, built-in RTTY demodulator with 8 RTTY TX memory channels, built-in high stabiltiy crystal oscillator, dual in-band RX, 101 memory channels, microphone compressor, RF speech compressor, spectrum scope display, SWR meter, microphone equalizer, triple band stacking registers, twin PBT, VOX, 100% duty cycle, 60m coverage, and more!

The radio is supplied with a hand microphone with up and down frequency controls and a fused DC power cord.

756 ProIII Specifications

General

Frequency coverage
- RX: 0.03 - 60.000 MHz *1, *2
- TX:
  - 1.800 - 1.999 MHz
  - 3.500 - 3.999 MHz
  - 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz
  - 7.000 - 7.300 MHz
  - 10.100 - 10.150 MHz *2
  - 14.000 - 14.350 MHz *2
  - 18.068 - 18.168 MHz *2
  - 21.000 - 21.450 MHz *2
  - 24.890 - 24.990 MHz *2
  - 28.000 - 29.700 MHz *2
  - 50.000 - 54.000 MHz *2
- *1=some freq. bands are not guaranteed. *2=Depending on version
Mode: USB, LSB, CW, RTTY, AM, FM
Number of memory channels: 101 (99 regular, 2 scan edges)
Antenna connector: SO-239x2 and phono [RCA;(50 ohms)]
Usable temperature range: -10°C to +50°C; +14°F to +122°F
Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)
Frequency resolution: 1Hz
Power supply requirement: 13.8 V DC (±15% negative ground)
Power consumption:
- TX max power 23A
- RX standby 3.0A (typ.)
- RX max audio 3.5A (typ.)
Dimensions (projections not included): 340(W) x 111(H) x 285(D) mm; 13.37(W) x 4.37(H) x 11.22(D) inches
Weight: 9.6 kg; 21.2 lb.
ACC 1 connector: 8-pin DIN connector
ACC 2 connector: 7-pin DIN connector
CI-V connector: 2-conductor 3.5 (d) mm (1/8")
Display: 5-inch (diagonal) TFT color LCD

Transceiver

Output power (continually adjustable):
- SSB/CW/RTTY/FM: 5 -100 Watts
- AM: 5 - 40 Watts
Modulation system:
- SSB: PSN modulation
- AM: Low power modulation
- FM: Phase modulation
Spurious emissions: 50 dB (HF bands), 60 dB (50 MHz band)
Carrier suppression: 40 dB
Unwanted sideband suppression: 55 dB
delta TX variable range: ±9.999 kHz
Microphone connector: 8-pin connector (600 ohms)
ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4")
KEY connector: 3-conductor 6.35 (d) mm (1/4")
SEND connector: Phono (RCA)
ALC connector: Phono (RCA)

Receiver

Receive system: Triple conversion superheterodyne
Intermediate frequencies:
- 1st: 64.455 MHz (for all modes)
- 2nd: 455 kHz (for all modes)
- 3rd: 36 kHz (for all modes)

Sensitivity (typical):

Frequency range (MHz)	SSB, CW, RTTY (at 2.4 kHz BW)	AM (at 6 kHz BW)	FM (at 15 kHz BW)
0.50-1.799	--	13 µV	--
1.80-27.99	0.16 µV *1	2 µV *1	--
28.0-29.99	0.16 µV *1	2 µV *1	0.5 µV *1
50.0-54.0	0.13 µV *2	1 µV	0.32 µV *2

10 db S/N for SSB, CW, RTTY and AM, 12 dB SINAD for FM
*1=pre-amp 1 is ON, *2=pre-amp 2 is ON

Squelch sensitivity (Pre-amp OFF):
- SSB, RTTY, CW: Less than 5.6 µV
- FM: Less than 1 µV
Selectivity (representative value):
- SSB, RTTY (BW: 2.4 kHz): More than 2.4 kHz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 2.8 kHz/-60 dB
- CW (BW: 500 Hz): More than 500 Hz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 700 Hz/-60 dB
- AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 15.0 kHz/-60 dB
- FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB
Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band)
AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load
RIT variable range: ±9.999 kHz
PHONES connector: 2-pin connector 6.35 (d) mm (1/4")
EXT SP connector: 2-pin connector 3.5 (d) mm (1/4")/8 ohms
Specifications are subject to change without notice or obligation. UR

Antenna Tuner

Matching impedance range:
- 16.7 - 150 ohms unbalanced *1 (HF bands)
- 20 - 125 ohms unbalanced *2 (50 MHz band)
- *1=Less than VSWR 3:1; *2=Less than VSWR 2.5:1
Minimum operating input power: 8 Watts
Tuning accuracy: VSWR 1.5:1 or less
Insertion loss: Less than 1.0 dB(after tuning)