Ham Radios - HF (some with VHF) - ICOM 7600 HF/6M - BEST VALUE HF ON THE MARKET AT PRESENT - radios.net.au shop

WE ALSO HAVE USED ICOM 7600 - COMPLETE WITH WARRANTY FOR $3599 (EMAIL US FOR DETAILS OR CHECK OUR USED EQUIPMENT PAGE)

The ICOM IC-7600 promises professional performance in the 160 to 6 meter amateur bands.

It utilizes Icom's proven IF-DSP technology and features selectable roofing filters at 3kHz, 6kHz and 15kHz.

Like the IC-7700 and IC-7800, the IC-7600 uses dual 32-bit floating-point Texas Instruments DSP chips with one for the radio other for the spectrum scope. 104dB dynamic range and +30dbm 3rd order intercept point is achieved on the HF bands. It utilizes a double superhet with an image-rejection 2nd mixer circuit providing improved in-band IMD. The 5.8 inch (diagonal) color WQVGA display has a quick-start LED backlight and views well from any angle and you can even program your startup screen.

Dual frequency watch is available with same band operation. There is even a RTTY and PSK31 encoder/decoder built-in!

All the features you would expect are here including PBT, RIT, XIT, keypad, 24 hour clock-timer, 101 memories and multiple scan modes. There is also a built-in voice recorder and voice synthesizer (English/Japanese selectable].

This radio has two USB ports. The front panel USB port is for keyboard or memory drive (not supplied) and one on the rear panel for PC control and audio.

This radio has a six transmit meter functions and three meter display modes. Plus a meter output jack on the rear panel.

Enjoy great stability with a built-in TCXO providing 0.5ppm (0 - 50°C). There is both a mechanical relay (16V/0.5A) and FET relay (250V/200mA) for keying external amplifier.

Separate RX-OUT and RX-IN antenna ports are provided allowing connection of external preselectors, multicouplers etc. There is also a transverter port.

his radio requires 13.8 VDC at 23 amps. The IC-7600 comes with HM-36 hand microphone, OPC-1457 DC power cable, MB-121 carry handle, CW plug and spare fuses.

7600 Specifications

General

Frequency coverage
- RX: 0.03 - 60.000 MHz *1, *2
- TX:
  - 1.800 - 1.999 MHz
  - 3.500 - 3.999 MHz
  - 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz
  - 7.000 - 7.300 MHz
  - 10.100 - 10.150 MHz *2
  - 14.000 - 14.350 MHz *2
  - 18.068 - 18.168 MHz *2
  - 21.000 - 21.450 MHz *2
  - 24.890 - 24.990 MHz *2
  - 28.000 - 29.700 MHz *2
  - 50.000 - 54.000 MHz *2
- *1=some freq. bands are not guaranteed. *2=Depending on version
Mode: USB, LSB, CW, RTTY, PSK31, AM, FM
Number of memory channels: 101 (99 regular, 2 scan edges)
Antenna connector: SO-239x2 and phono [RCA;(50 ohms)]
Usable temperature range: 0°C to +50°C; +32°F to +122°F
Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)
Frequency resolution: 1Hz
Power supply requirement: 13.8 V DC (±15% negative ground)
Power consumption:
- TX max power 23A
- RX standby 3.0A (typ.)
- RX max audio 3.5A (typ.)
Dimensions (projections not included): 340(W) x 116(H) x 280(D) mm; 13.37(W) x 4.5(H) x 11.2(D) inches
Weight: 10 kg; 25 lb.
ACC 1 connector: 8-pin DIN connector
ACC 2 connector: 7-pin DIN connector
CI-V connector: 2-conductor 3.5 (d) mm (1/8")
Display: 5.8 inch (diagonal) TFT color LCD

Transceiver

Output power (continually adjustable):
- SSB/CW/RTTY/PSK31/FM: 2 - 100 Watts
- AM: 1 - 30 Watts
Modulation system:
- SSB: PSN modulation
- AM: Low power modulation
- FM: Phase modulation
Spurious emissions: -50 dB (HF bands), -60 dB (50 MHz band)
Carrier suppression: 40 dB
Unwanted sideband suppression: 55 dB
delta TX variable range: ±9.999 kHz
Microphone connector: 8-pin connector (600 ohms)
ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4")
KEY connector: 3-conductor 6.35 (d) mm (1/4")
SEND connector: Phono (RCA)
ALC connector: Phono (RCA)

Receiver

Receive system: Double conversion superheterodyne
Intermediate frequencies:
- 1st: 64.455 MHz
- 2nd: 455 kHz
Squelch sensitivity (Pre-amp ON):
- SSB: Less than 3.2 µV
- FM: Less than 0.3 µV
Selectivity (representative value, filter shape at SHARP):
- SSB (BW: 2.4 kHz): More than 2.4 kHz/-6 dB, Less than 2.8 kHz/-60 dB
- CW (BW: 500 Hz): More than 500 Hz/-6 dB, Less than 700 Hz/-60 dB
- RTTY (BW: 350 Hz): More than 350 Hz/-6 dB, Less than 650 Hz/-60 dB
- AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 15.0 kHz/-60 dB
- FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB
Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band)
AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load
RIT variable range: ±9.999 kHz
PHONES connector: 2-pin connector 6.35 (d) mm (1/4")
EXT SP connector: 2-pin connector 3.5 (d) mm (1/4")/8 ohms

Antenna Tuner

Matching impedance range:
- 16.7 - 150 ohms unbalanced *1 (HF bands)
- 20 - 125 ohms unbalanced *2 (50 MHz band)
- *1=Less than VSWR 3:1; *2=Less than VSWR 2.5:1
Minimum operating input power: 8 Watts
Tuning accuracy: VSWR 1.5:1 or less
Insertion loss: Less than 1.0 dB(after tuning)
Specifications are preliminary are subject to change without notice or obligation.