Ham Radios - HF (some with VHF & UHF) - Icom 7000 HF VHF UHF Radio IC-7000 (add $65 for new RMK-7000 mobile kit when purchased with radio) - radios.net.au shop

WE ALSO HAVE USED ICOM 7000 - COMPLETE WITH WARRANTY FOR $1199 (EMAIL US FOR DETAILS OR CHECK OUR USED EQUIPMENT PAGE)

The Icom IC-7000 is a compact HF/6m/2m/70cm all mode transceiver. The radio has a 2.5" color TFT LCD display with 2-mode bandscope function, and features twin DSP (offering digital IF filtering, dual manual notch filters, digital voice recorder, 100-step noise blanker, and 16-step noise reduction), CTCSS tone encode/decode, 503 memory channels, CW memory keyer, built-in S/PWR/SWR meter, built-in voice synthesizer, 24-hour clock, and more.

Supplied with a backlit remote control hand microphone with up/down controls, and a fused DC power cord.

7000 Specifications

General

Frequency Coverage:
- Receive:
  0.030 - 199.999 MHz^*, 400 - 470 MHz^*
- Transmit:
  1.8 - 1.999 MHz^*
  3.5 - 3.999 MHz^*
  7.0 - 7.300 MHz^*
  10.1 - 10.150 MHz
  14.0 - 14.350 MHz
  18.068 - 18.168 MHz
  21.0 - 21.450 MHz
  24.89 - 24.990 MHz
  28.0 - 29.700 MHz
  50.0 - 54.000 MHz^*
  144.0 - 148.000 MHz^*
  430.0 - 450.000 MHz^*
  * Varies according to version
Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
Number of memory channels: 503 (495 regular, 6 scan edges, 2 call channels)
Antenna connector: SO-239x2 (for HF/50 MHz and 144/430 MHz)/50 ohms
Power supply requirement: 13.8 V ± 15% (negative ground)
Frequency stability: Less than ± 0.5ppm(0 ^°C (+50^°C).
- Current drain: Transmit max. power 22 A; Receive standby 1.3 A, max. audio 1.6 A
- Dimensions (projections not included):
  - 167(W) X 58(H) X 200(D) mm
  - 6-9/16(W) X 2-9/32(H) X 7-3/32(D) in
- Weight: 2.3 kg (5.1 lb)
- CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
- ACC connector: 13 pin

Transmitter

Output power:

	SSB/CW/RTTY/FM	AM
HF/50 MHz	2 - 100 W	1 - 40 W
144 MHz	2 - 50 W	2 - 20 W
440 MHz	2 - 35 W	2 - 14 W

Modulation system:

SSB	Balanced modulation
AM	Low level modulation
FM	Variable reactance modulation

Spurious emissions: Less than -50 dB (below 30 MHz) -60 dB (above 50 MHz) -60 dB)
Carrier suppression: More than 50 dB
Unwanted sideband: More than 50 dB
Microphone connector: 8 pin modular jack (600 ohm KEY connector: 3-conductor 6.35 (d) mm (1/4")
RTTY connector: 3-conductor 3.5 (d) mm (1/8")

Receiver

Receive system:
- SSB/CW/AM/WFM: Double superheterodyne
- FM: Triple superheterodyne

Intermediate frequencies

	1st	2nd	3rd
SSB/CW/AM/FM	124.487 MHz	455 KHz	16.15 kHz
WFM	134.732 MHz	10.700 MHz

Receive sensitivity (preamp on, except 4-4.5 and 8-9 MHz)

	SSB/CW 10 dB S/N	AM 10 dB S/N	FM 12 dB SINAD	WFM 12 dB SINAD
0.5 - 1.8 MHz	-	4.0 µV	-	-
1.8 - 28 MHz	0.15 µV	2.0 µV	-	-
28 - 29.7 MHz	0.15 µV	2.0 µV	0.5 µV	-
50 - 54 MHz	0.12 µV	1.0 µV	0.25 µV	-
76 - 108 MHz	-	-	-	10.0 µV
144/440 MHz band	0.11 µV	1.0 µV	0.18 µV	-

Squelch Sensitivity (threshold)

SSB	Less than 5.6 µV
FM	Less than 0.3 µV

Selectivity (normal setting)

SSB, CW, RTTY	More than 2.4 kHz/- 6 dB
	Less than 4.8 kHz/ -60 dB
AM/FM-N	More than 8.0 kHz/-6 dB
	Less than 30 kHz/-36 dB
FM	More than 12 kHz/-6 dB
	Less than 30 kHz/-60 dB

Spurious and image rejection ratio:
- SSB/CW/AM - More than 70 dB
Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
RIT variable range +/-9.99 kHz
PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohms
EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8 ohms