Icom 91A VHF UHF Hand Held Radio IC-91A

Product Information

One Radio, Two Bands. Three times the fun

The IC-91A is D-STAR optional.

Wide band receiver with dualwatch capability

The IC-91A has dualwatch receiver capability, allowing you to receive* two bands simultaneously (including same band). By pushing and holding the [Main/Dual] button, you can easily turn dualwatch on and off, while a press of the button allows you to toggle the active VFO channels.
*See specifications for receive range coverage.

Large dot-matrix LCD

Using a large full dot-matrix LCD (37.8×20mm; 1¹/₂×2⁵/₃₂ in), the IC-91A clearly shows two-line frequency settings, alphanumeric channel name, bandscope, etc. You can choose large or small font size in the setting mode. In addition, automatic LCD and keypad backlighting provides bright illumination for night time operation.

Simple bandscope

Spectrum activity is displayed on the screen and audio is heard while sweeping the range. It is useful for finding new or interfering signals.

5 Watts (typical) output

Icom’s original wideband PA circuit and supplied lithium-ion battery pack provides 5W (typ.) output. The supplied BP-217 provides up to 5/4.5 hours* of operating time and greatly reduces both the size and weight needed to obtain full output power.
* VHF/UHF single mode, Tx high: Rx: Stand-by duty ratio= 1: 1: 8

Keypad navigation

The 4 cursor direction buttons on the keypad gives you quick and intuitive access to many settings. The twin volume/channel knob provides convenient channel/volume setting.

External DC power jack

An external DC power jack allows for operation with an external DC power supply (10–16V DC). When used with the CP-19R or OPC-254L, simultaneous operation during charging is possible.

Built-in CTCSS/DTCS encoder and decoder

CTCSS and DTCS tones are used for accessing a repeater or for tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone.

Other features

• Squelch release function to monitor a weak signal.
• Water-resistant construction, equivalent to IPX4
• Auto power save, power off and power on
• 26 memory banks with selected bank and bank link scanning
• 10 channel DTMF memory (16-digit)
• 10dB (approx) built-in attenuator
• Total of 1304 memory channels
• Automatic repeater function*

NOTE: THIS IS US VERSION SO CUSTOMER MUST SUPPLY OWN 240V AUSSIE WALL CHARGER

• Specifications

Transmit Freq. Range:	144.000 - 148.000 MHz
			420.000 - 450.000 MHz
Receive Freq. Range:	< A band > [less cellular]
			000.495 - 252.895MHz 255.100 - 261.895MHz
			266.100 - 270.895MHz 275.100 - 379.895MHz
			382.100 - 411.895MHz 415.100 - 809.890MHz
			834.100 - 859.890MHz 889.100 - 914.890MHz
			960.100 - 999.990MHz
			< B band >
			118.000 - 174.000MHz 350.000 - 379.825MHz
			382.100 - 411.895MHz 415.100 - 470.000MHz
Emission Type: 		F2D/F3E/F7W
Op. Temperature Range: 	-20° C - +60° C
Frequency Stability: 	±2.5 ppm (-20° C - +60° C) 25° C is standard
Digital Trans. Speed:	4.8 kbps
Audio Coded Speed: 	2.4 kbps
Antenna Impedance: 	50 ohms unbalanced (SMA type)
Memory Channels: 	1304 channels (includes memory, call and scan-edge)
Power Supply Voltage:	DC 7.4V (BP-217)
External terminal:	DC 10.0 - 16.0 V
Battery terminal:	DC 5.0 - 10.0 V
Grounding:		Negative ground
Frequency Resolution: 	5, 6.25 and 8.33 (in air band), 9 (AM radio band), 10, 
			12.5, 15, 20, 25, 30, 50, 100, 125 and 200 kHz
External Size:		58.4 (W) x 103 (H) x 34.2 (D) mm
Xmit Power Consumption:	Hi: 5W/ 2.1 A (typ), Lo:  0.5W/0.8 A (typ)
Modulation Type:	FM/FM Phase Reactance, DV/GMSK Phase Reactance
Freq. Deviation:	FM Wide/±5.0 kHz, Narrow/±2.5 kHz
Microphone Impedance:	2k ohms

Specifications are subject to change.  

Be the first to review this product!

Price: $429.00

• Tell a Friend
• Write review / comment

In Stock: 1 THIS IS A BRAND NEW ITEM AND IS CURRENTLY IN STOCK

Recommended Accessories:
	Add Icom HM-75A Deluxe Speaker Mic HM75A @ $104.00 (details)
	Add Icom OPC-1529R programming cable for the Icom 2820H OPC1529R @ $49.00 (details)
	Add SMA to BNC Adapter @ $9.90 (details)

Quantity: Add to Basket